Telescopic fixed
APOLLO 25.6 R – 25.6 54,6 kW
APOLLO 25.6 R – 25.6 54,6 kW
Characteristics:
- MAXIMUM FLOW RATE 2500 kg
- MAXIMUM LIFTING HEIGHT 5.78 m
- MAXIMUM POWER 36,5 kW (49 HP) – 54,6 kW (73 HP)
![25.6 54,6 kW](https://ims-htm.com/wp-content/uploads/2017/03/25.6--546-kW.jpeg)
Agri 25.6 can be fitted, in addition to the full range of accessories offered by the company (lifting hooks, grippers of various kinds, buckets for excavation and inert material), also with winches and baskets. The cab (the most spacious in its category, ROPS – FOPS approved) is designed to ensure a high level of comfort, thanks to the new doors in DSCS, an innovative lightweight composite material, with high thermal and acoustic insulation characteristics, made by the Dieci Research and Development center. The dual objective of significantly lightening the vehicle (improving its performance) and considerably increasing the thermal and acoustic insulation, comfort and roominess is obtained by using this material.
DEDALUS 28.7 VS 73,4 kW – 28.7 73,4 kW
DEDALUS 28.7 VS 73,4 kW – 28.7 73,4 kW
Characteristics:
- MAXIMUM FLOW RATE 2800 kg
- MAXIMUM LIFTING HEIGHT 6.35 m
- MAXIMUM POWER 73,4 kW (98 HP)
![mfe3140](https://ims-htm.com/wp-content/uploads/2017/03/mfe3140.jpeg)
Thanks to the innovative P-ECS system (which automatically adjusts the engine speed optimizing it according to the required hydraulic power), and the Vario transmission system (which automatically sets the best speed/power ratio in any working condition), DEDALUS 28.7 VS is capable of a high fluidity of movement and a very high level of precision in small movements, with a greater comfort for the operator, a lower sound emission in the cab, and 18% increased fuel saving. DEDALUS 28.7 VS can be equipped with the new FNR Joystick to precisely and safely handle all the vehicle functions with a simple movement of the operator’s wrist. The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
DEDALUS 28.9 VS 73,4 kW – 28.9 73,4 kW
DEDALUS 28.9 VS 73,4 kW – 28.9 73,4 kW
Characteristics:
- MAXIMUM FLOW RATE 2800 kg
- MAXIMUM LIFTING HEIGHT 8.7 m
- MAXIMUM POWER 73,4 kW (98 HP)
![28.9 73,4 kW](https://ims-htm.com/wp-content/uploads/2017/03/28.9--734-kW.jpeg)
Thanks to the innovative P-ECS system (which automatically adjusts the engine speed optimizing it according to the required hydraulic power), and the Vario transmission system (which automatically sets the best speed/power ratio in any working condition), DEDALUS 28.9 VS is capable of a high fluidity of movement and a very high level of precision in small movements, with a greater comfort for the operator, a lower sound emission in the cab, and 18% increased fuel saving. DEDALUS 28.9 VS can be equipped with the new FNR Joystick to precisely and safely handle all the vehicle functions with a simple movement of the operator’s wrist. The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
DEDALUS 30.7 VS 73,4 kW – 30.7 73,4 kW
DEDALUS 30.7 VS 73,4 kW – 30.7 73,4 kW
Characteristics:
- MAXIMUM FLOW RATE 3000 kg
- MAXIMUM LIFTING HEIGHT 6.35 m
- MAXIMUM POWER 73,4 kW (98 HP)
![mfe3146](https://ims-htm.com/wp-content/uploads/2017/03/mfe3146.jpeg)
Thanks to the innovative P-ECS system (which automatically adjusts the engine speed optimizing it according to the required hydraulic power), and the Vario transmission system (which automatically sets the best speed/power ratio in any working condition), DEDALUS 30.7 VS is capable of a high fluidity of movement and a very high level of precision in small movements, with a greater comfort for the operator, a lower sound emission in the cab, and 18% increased fuel saving. DEDALUS 30.7 VS can be equipped with the new FNR Joystick to precisely and safely handle all the vehicle functions with a simple movement of the operator’s wrist. The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.v
DEDALUS 30.9 VS 73,4 kW – 30.9 73,4 kW
DEDALUS 30.9 VS 73,4 kW – 30.9 73,4 kW
Characteristics:
- MAXIMUM FLOW RATE 3000 kg
- MAXIMUM LIFTING HEIGHT 8.7 m
- MAXIMUM POWER 73,4 kW (98 HP)
![mfe3437](https://ims-htm.com/wp-content/uploads/2017/03/mfe3437.jpeg)
Small and compact vehicle, DEDALUS 30.9 stands out for its handling, power and precision characteristics and for its great fluidity of movement. DEDALUS 30.9 can be equipped with the new FNR Joystick to precisely and safely handle all the vehicle functions with a simple movement of the operator’s wrist. The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
DEDALUS 32.6 73,4 kW
DEDALUS 32.6 73,4 kW
Characteristics:
- MAXIMUM FLOW RATE 3200 kg
- MAXIMUM LIFTING HEIGHT 6 m
- MAXIMUM POWER 73,4 kW (98 HP)
![mfe3002](https://ims-htm.com/wp-content/uploads/2017/03/mfe3002.jpeg)
The DEDALUS models, produced with increasing capacities and lifting heights, are particularly suitable for use in road maintenance works, in town centers and in undergrounds.
Small and compact vehicle, DEDALUS 32.6 stands out for its handling, power and precision characteristics and for its great fluidity of movement. DEDALUS 32.6 can be equipped with the new FNR Joystick to precisely and safely handle all the vehicle functions with a simple movement of the operator’s wrist. The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
HERCULES 100.10 129 kW
HERCULES 100.10 129 kW
Characteristics:
- MAXIMUM FLOW RATE 10000 KG
- MAXIMUM LIFTING HEIGHT 9.5 m
- MAXIMUM POWER 129 kW (173 HP)
![100.10 129 kW](https://ims-htm.com/wp-content/uploads/2017/03/100.10--129-kW.jpeg)
They include all the “pluses” related to safety, handling and comfort, in addition to highly advanced hydraulic solutions, able to use all of their strength in large construction sites, in mining sites and quarries, in harbors and shipbuilding yards, and “heavy” work in general.
Hercules 100.10 is characterized by optimized combustion control and significantly reduced consumption, thanks also to the exhaust gas SCR (selective catalytic reduction) treatment technology.
HERCULES 120.10 129 kW
HERCULES 120.10 129 kW
Characteristics:
- MAXIMUM FLOW RATE 12000 KG
- MAXIMUM LIFTING HEIGHT 9.4 m
- MAXIMUM POWER 129 kW (173 HP)
![120.10 129 kW](https://ims-htm.com/wp-content/uploads/2017/03/120.10--129-kW.jpeg)
They include all the “pluses” related to safety, handling and comfort, in addition to highly advanced hydraulic solutions, able to use all of their strength in large construction sites, in mining sites and quarries, in harbors and shipbuilding yards, and “heavy” work in general.
HERCULES 120.10 can fit a wide range of accessories (winches, forks and buckets) or tools, finishes and ad hoc solutions, for specific needs. It is equipped with pedal “INCHING” command (DIECI exclusive), which allows the machine to run at slow speed also with engine at full throttle.
HERCULES 190.10 129 kW
HERCULES 190.10 129 kW
Characteristics:
- MAXIMUM FLOW RATE 19000 KG
- MAXIMUM LIFTING HEIGHT 10.2 m
- MAXIMUM POWER 129 kW (173 HP)
![100.10 129 kW](https://ims-htm.com/wp-content/uploads/2017/03/100.10--129-kW.jpeg)
They include all the “pluses” related to safety, handling and comfort, in addition to highly advanced hydraulic solutions, able to use all of their strength in large construction sites, in mining sites and quarries, in harbors and shipbuilding yards, and “heavy” work in general.
HERCULES 190.10 is equipped with HYDROSTATIC transmission and CENTRAL DIFFERENTIAL, that allows to compensate for the wheels rolling differences on the front and rear axle, minimizing the efforts and obtaining improved fuel savings. It is also fitted with “LOAD SENSING- FLOW SHARING” proportional distributor with electronic control, boom raising regenerative system, which increases the boom lifting speed and “INCHING” pedal which allows the vehicle to run at slow speed even with engine at full throttle.
HERCULES 210.10 129 kW
HERCULES 210.10 129 kW
Characteristics:
- MAXIMUM FLOW RATE 21000 KG
- MAXIMUM LIFTING HEIGHT 10.2 m
- MAXIMUM POWER 129 kW (173 HP)
![120.10 129 kW](https://ims-htm.com/wp-content/uploads/2017/03/120.10--129-kW.jpeg)
They include all the “pluses” related to safety, handling and comfort, in addition to highly advanced hydraulic solutions, able to use all of their strength in large construction sites, in mining sites and quarries, in harbors and shipbuilding yards, and “heavy” work in general.
HERCULES 210.10 is equipped with HYDROSTATIC transmission and CENTRAL DIFFERENTIAL, that allows to compensate for the wheels rolling differences on the front and rear axle, minimizing the efforts and obtaining improved fuel savings. It is also fitted with “LOAD SENSING- FLOW SHARING” proportional distributor with electronic control, and “INCHING” pedal which allows the vehicle to run at slow speed even with engine at full throttle.
ICARUS 40.14 83,5 kW
ICARUS 40.14 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 4000 kg
- MAXIMUM LIFTING HEIGHT 13.5 m
- MAXIMUM POWER 83,5 kW (112 HP)
![40.14 83,5 kW](https://ims-htm.com/wp-content/uploads/2017/03/40.14--835-kW.jpeg)
The engine hood has been designed to reduce the noise emission and optimize heat dissipation, furthermore, since it has to operate in workplaces which are often dusty, the ICARUS 40.14 versions are equipped with separator pre-filter applied to the air filter, which prevents the entrance of dust and abrasive particles, allowing greater efficiency and longer engine life. The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab and digital speedometer. To further enhance comfort, new seats with automatic suspension can be installed on request.
ICARUS 40.17 83,5 kW
ICARUS 40.17 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 4000 kg
MAXIMUM LIFTING HEIGHT 16.9 m
- MAXIMUM POWER 83,5 kW (112 HP)
![40.17 83,5 kW](https://ims-htm.com/wp-content/uploads/2017/03/40.17--835-kW.jpeg)
The engine hood has been designed to reduce the noise emission and optimize heat dissipation, furthermore, since it has to operate in workplaces which are often dusty, the ICARUS 40.17 versions are equipped with separator pre-filter applied to the air filter, which prevents the entrance of dust and abrasive particles, allowing greater efficiency and longer engine life. The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab and digital speedometer. To further enhance comfort, new seats with automatic suspension can be installed on request.
RUNNER 35.7 83,5 kW
RUNNER 35.7 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 3500 kg
- MAXIMUM LIFTING HEIGHT 7.3 m
- MAXIMUM POWER 83,5 kW (112 HP)
![35.7 83,5 kW](https://ims-htm.com/wp-content/uploads/2017/03/35.7--835-kW.jpeg)
The Runner “Family” consists of extremely versatile vehicles, especially suitable to any environmental and working situation, thanks to the wide range of accessories that can be fitted.
RUNNER 40.13 83,5 kW
RUNNER 40.13 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 4000 kg
- MAXIMUM LIFTING HEIGHT 12.4
- MAXIMUM POWER 83,5 kW (112 HP)
![40.13 83,5 kW](https://ims-htm.com/wp-content/uploads/2017/03/40.13--835-kW.jpeg)
The Runner “Family” consists of extremely versatile vehicles, especially suitable to any environmental and working situation, thanks to the wide range of accessories that can be fitted.
SAMSON 45.8 83,5 kW
SAMSON 45.8 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 4500 kg
- MAXIMUM LIFTING HEIGHT 7.9 m
- MAXIMUM POWER 83,5 kW (112 HP)
![45.8 83,5 kW](https://ims-htm.com/wp-content/uploads/2017/03/45.8--835-kW.jpeg)
Samson 45.8 is the smallest of the series: compact agile and fast, it is ideal for working in confined and difficult spaces when a good lifting capacity is required.
The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
SAMSON 60.9 VS EVO2 103 kW – 60.9 VS EVO2 96 kW – 60.9 103 kW – 60.9 96 kW
SAMSON 60.9 VS EVO2 103 kW – 60.9 VS EVO2 96 kW – 60.9 103 kW – 60.9 96 kW
Characteristics:
- MAXIMUM FLOW RATE 6000 kg
- MAXIMUM LIFTING HEIGHT 8.6 m
- MAXIMUM POWER 96 kW (129 HP) – 113 kW (152 HP)
![mfm3207](https://ims-htm.com/wp-content/uploads/2017/03/mfm3207.jpeg)
Samson 60.9 VS EVO2, compact and powerful, is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate particularly effective if combined with the use of the bucket.
The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
It is equipped with “Vario System EVO2” transmission (with 4 driving modes “Automotive” “Loader” “Creeper” and “ECO”) and Proportional 4 in 1 Joystick combined with a “load sensing” variable displacement pump, which increases the movement speed and allows to carry out up to 4 simultaneous movements.
SAMSON 65.8 VS EVO2 103 kW – 65.8 VS EVO2 96 kW – 65.8 103 kW – SAMSON 65.8 96 kW
SAMSON 65.8 VS EVO2 103 kW – 65.8 VS EVO2 96 kW – 65.8 103 kW – SAMSON 65.8 96 kW
Characteristics:
- MAXIMUM FLOW RATE 6500 kg
- MAXIMUM LIFTING HEIGHT 7.7 m
- MAXIMUM POWER 96 kW (129 HP) – 113 kW (152 HP)
![mfn3108](https://ims-htm.com/wp-content/uploads/2017/03/mfn3108.jpeg)
Samson 65.8 VS EVO2, compact and powerful, is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate particularly effective if combined with the use of the bucket.
The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
It is equipped with “Vario System EVO2” transmission (with 4 driving modes “Automotive” “Loader” “Creeper” and “ECO”) and Proportional 4 in 1 Joystick combined with a “load sensing” variable displacement pump, which increases the movement speed and allows to carry out up to 4 simultaneous movements.
SAMSON 75.10 103 kW – 75.10 96 kW
SAMSON 75.10 103 kW – 75.10 96 kW
Characteristics:
- MAXIMUM FLOW RATE 7500 kg
- MAXIMUM LIFTING HEIGHT 9.65 m
- MAXIMUM POWER 96 kW (129 HP) – 113 kW (152 HP)
![mfo3510](https://ims-htm.com/wp-content/uploads/2017/03/mfo3510.jpeg)
Samson 75.10 in particular stands out for power, strength and speed, the ideal vehicle for heavy industry in general, and for great lifting capacity needs.
The cab, ROPS-FOPS approved, designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. The on-board computer with LCD display, allows the operator to monitor all the machine operating parameters.
ZEUS 33.11 83,5 kW
ZEUS 33.11 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 3300 kg
- MAXIMUM LIFTING HEIGHT 10.6 m
- MAXIMUM POWER 83,5 kW (112 HP)
![mff3610](https://ims-htm.com/wp-content/uploads/2017/03/mff3610.jpeg)
ZEUS 33.11 is equipped with hydrostatic transmission combined with pedal “INCHING” command, that allows the vehicle to run at slow speed also with engine at full throttle. It is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate. The extension cylinder located inside the boom also improves visibility and safety in use.
The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. To further enhance comfort, new seats with automatic suspension can be installed on request.
ZEUS 37.7 83,5 kW – 37.8 83,5 kW
ZEUS 37.7 83,5 kW – 37.8 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 3700 kg
- MAXIMUM LIFTING HEIGHT 7.35 m – 7.8 m
- MAXIMUM POWER 83,5 kW (112 HP)
![mff3221](https://ims-htm.com/wp-content/uploads/2017/03/mff3221.jpeg)
ZEUS 37.8 is equipped with hydrostatic transmission combined with pedal “INCHING” command, that allows the vehicle to run at slow speed also with engine at full throttle. It is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate. The extension cylinder located inside the boom also improves visibility and safety in use.
The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. To further enhance comfort, new seats with automatic suspension can be installed on request.
ZEUS 38.10 EVO 2 83,5 kW
ZEUS 38.10 EVO 2 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 3800 kg
- MAXIMUM LIFTING HEIGHT 9.6 m – 9.75 m – 7.6 m
- MAXIMUM POWER 83,5 kW (112 HP)
![mff3319](https://ims-htm.com/wp-content/uploads/2017/03/mff3319.jpeg)
The ZEUS range consists of powerful and compact telehandlers, designed to give the user the right balance between power and agility, wherever it is necessary to handle heavy loads in confined spaces, in either the construction and agriculture sectors.
ZEUS 38.8 EVO 2 83,5 kW
ZEUS 38.8 EVO 2 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 3800 kg
- MAXIMUM LIFTING HEIGHT 7.6 m
- MAXIMUM POWER 83,5 kW (112 HP)
![mff3319](https://ims-htm.com/wp-content/uploads/2017/03/mff3319-1.jpeg)
ZEUS 38.8 EVO2 is equipped with “INCHING” pedal, which allows the vehicle to run at slow speed even with engine at full throttle, and a VS transmission with variable displacement pump and hydrostatic motor, that allows acceleration from 0 to 40 km/h without the need to change gear.
It is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate. The extension cylinder located inside the boom also improves visibility and safety in use.
The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. To further enhance comfort, new seats with automatic suspension can be installed on request.
ZEUS 40.7 EVO 2 83,5 kW
ZEUS 40.7 EVO 2 83,5 kW
Characteristics:
- MAXIMUM FLOW RATE 4000 kg
- MAXIMUM LIFTING HEIGHT 7.2 m
- MAXIMUM POWER 83,5 kW (112 HP)
![mfg3123](https://ims-htm.com/wp-content/uploads/2017/03/mfg3123.jpeg)
ZEUS 40.7 EVO2 is equipped with “INCHING” pedal, which allows the vehicle to run at slow speed even with engine at full throttle, and a VS transmission with variable displacement pump and hydrostatic motor, that allows acceleration from 0 to 40 km/h without the need to change gear.
It is particularly suitable for loading and unloading materials, thanks to its swing kinematic mechanism equipped with counter-lever, which allows to considerably increase the rotation angle of the fork carrier plate. The extension cylinder located inside the boom also improves visibility and safety in use.
The cab, ROPS-FOPS approved, equipped with every safety device and designed to ensure a high level of comfort, can be equipped with an enhanced air conditioning system which allows perfect air circulation inside the cab. To further enhance comfort, new seats with automatic suspension can be installed on request.